diff --git a/drivers/sk98lin/h/skgedrv.h b/drivers/sk98lin/h/skgedrv.h
new file mode 100644
index 0000000..a6bac08
--- /dev/null
+++ b/drivers/sk98lin/h/skgedrv.h
@@ -0,0 +1,72 @@
+/******************************************************************************
+ *
+ * Name:	skgedrv.h
+ * Project:	GEnesis, PCI Gigabit Ethernet Adapter
+ * Version:	$Revision: 1.6 $
+ * Date:	$Date: 2002/07/15 15:38:01 $
+ * Purpose:	Interface with the driver
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ *	(C)Copyright 1998-2002 SysKonnect GmbH.
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	The information in this file is provided "AS IS" without warranty.
+ *
+ ******************************************************************************/
+
+/******************************************************************************
+ *
+ * History:
+ *
+ *	$Log: skgedrv.h,v $
+ *	Revision 1.6  2002/07/15 15:38:01  rschmidt
+ *	Power Management support
+ *	Editorial changes
+ *	
+ *	Revision 1.5  2002/04/25 11:05:47  rschmidt
+ *	Editorial changes
+ *	
+ *	Revision 1.4  1999/11/22 13:52:46  cgoos
+ *	Changed license header to GPL.
+ *	
+ *	Revision 1.3  1998/12/01 13:31:39  cgoos
+ *	SWITCH INTERN Event added.
+ *	
+ *	Revision 1.2  1998/11/25 08:28:38  gklug
+ *	rmv: PORT SWITCH Event
+ *	
+ *	Revision 1.1  1998/09/29 06:14:07  gklug
+ *	add: driver events (initial version)
+ *	
+ *
+ ******************************************************************************/
+
+#ifndef __INC_SKGEDRV_H_
+#define __INC_SKGEDRV_H_
+
+/* defines ********************************************************************/
+
+/*
+ * Define the driver events.
+ * Usually the events are defined by the destination module.
+ * In case of the driver we put the definition of the events here.
+ */
+#define SK_DRV_PORT_RESET		 1	/* The port needs to be reset */
+#define SK_DRV_NET_UP   		 2	/* The net is operational */
+#define SK_DRV_NET_DOWN			 3	/* The net is down */
+#define SK_DRV_SWITCH_SOFT		 4	/* Ports switch with both links connected */
+#define SK_DRV_SWITCH_HARD		 5	/* Port switch due to link failure */
+#define SK_DRV_RLMT_SEND		 6	/* Send a RLMT packet */
+#define SK_DRV_ADAP_FAIL		 7	/* The whole adapter fails */
+#define SK_DRV_PORT_FAIL		 8	/* One port fails */
+#define SK_DRV_SWITCH_INTERN	 9	/* Port switch by the driver itself */
+#define SK_DRV_POWER_DOWN		10	/* Power down mode */
+
+#endif	/* __INC_SKGEDRV_H_ */